Gotham IVO4CYL PC D 10LM 35K 80CRI MD MIN10 MVOLT ZT L9 JBX CAN S20 E10WR P BR LD DBL 4" Round Pendant Mount Cylinder, Downlight, 1000 Lumens, 3500K, 80 CRI, Med Batwing, 10% Dim, 120-277V, 0-10V, 9" Length, Matte Black

Gotham IVO4CYL PC D 10LM 35K 80CRI MD MIN10 MVOLT ZT L9 JBX CAN S20 E10WR P BR LD DBL 4" Round Pendant Mount Cylinder, Downlight, 1000 Lumens, 3500K, 80 CRI, Med Batwing, 10% Dim, 120-277V, 0-10V, 9" Length, 5 Deg Hang Straight Swivel, 20' Pendant, 10W Emergency Battery Pack, Parabolic Trim, Matte Diffuse Trim, Matte Black

PRODUCT FAMILY SPECIFICATIONS
Optical System

• Bounding Ray optical design delivers low brightness apertures for a comfortable lighting experience. Bounding Ray optical design ensures no source image up to cut-off angle, minimizing glare.
• 45 degrees visual cut-off angle to source for L9, L14 and L16 lengths and 65 degrees visual cut-off for L5 length per CIE 117-1995 Discomfort Glare in Interior Lighting (UGR FAQ)
• Top-Down Flash characteristics avoid flash on trim until source becomes visible.
• Batwing distributions with feathered edges to provide even illumination fixture-to-fixture. Available with 0.8, 1.0, and 1.2 spacing-to-mountingheight ratio (s/mh).
• Clean beams with soft transitions from narrow spot 10° up to wide flood 60 degrees distributions and available every 5 degrees.
• Optics are field changeable. However, L5 Cylinder Length optics aer not interchangeable with other Cylinder Length optics.

LED Light Engine

• Perfect Color consistency within 1/2-step MacAdam Ellipse using proprietary pick and place algorithm.
• 90% lumen maintenance at 55,000 hours.
• Available in 80, 90, or 95 CRI. 90 CRI has R9 greater than 50, 95 CRI has R9 greater than 80.

Trims

• Trims are field changeable via twist-lock (tool-free). However L5 Cylinder Length trims are not interchangeable with other Cylinder Lengths.
• Trims are available in 9 colors and 3 surface finishes (standard)
• Custom RAL and Paint colors available upon request.
• Trim lenses are made of Tempered Glass

Electrical

• 120, 277, 347, or Multi-Volt (MVOLT) 120-277 VAC input at 50/60 Hz.
• Power Factor > 85%.
• Input wires 18 AWG, 600V minimum, solid copper.

EMI/RFI

• EMI/RFI per FCC Title 47 CFR, Part 15, Class A rated standard.
• EMI/RFI per FCC Title 47 CFR, Part 15, Class B rated for Phase Dimming driver (ELV) except when used with Emergency Battery (E7WR, E10WR, E15WR) or at 15LM and above.

Controls (Optional)

• Luminaire can be equipped with interface for nLight wired, allowing it to communicate over an nLight network. nLight wired options ship with an nPS 80 EZ power pack to be mounted to a plenum j-box through (via 1/2" knockout) and connected to the Fixture control wires. Couple with nLight-enabled sensors, power packs, or WallPods using CAT-5 cabling to create an nLight Control Zone. Link Control Zone to a Gateway directly or via a Bridge for remote status monitoring and control using SensorView software.
• Luminaire can be equipped with interface for nLight Air, allowing it to communicate over the wireless nLight control platform. nLight Air options ship with an rPP20 power pack to be mounted to a plenum j-box through (via 1/2" knockout) and connected to the Fixture control wires. Can be paired to other luminaires and wall switches through CLAIRITY+, a mobile app, which allows individual fixture control.

Dimming

• Luminaire Is capable of continuous dimming without perceivable flicker (stroboscopic) as measured by flicker index (ASNI/IES RP-16-10).
• Available dimming ranges include: 100%-10% (MIN10), 100%-1% (MIN1), and 100%-0.1% (DARK) of rated lumen output.
• Available with smooth shut off function from minimum dimming level to 0%.
• EldoLED drivers (EZT, DALI) conform to IEEE P1789 standards.
• Drivers are inaudible in 24dB environment and stable even when input voltage conditions experience typical commercial environment fluctuations.

Installation

• Rigid Stems are field cuttable with no threading required.
• Rigid Stem lengths consist of 2ft and 4ft sections.
• Powered Mounting Cords are field cuttable down to 4" and include integrated Aircraft Cable (patented) for mechanical support without visible cable.
• Luminaire can be installed to 4" Octagonal j-box (1-1/2" or 2-1/8" deep depending on ordering configuration).
• Luminaire can be installed to 4" Square j-box (1-1/2" deep) when used with Cylinder Adaptor Plate (CLYLJBOXADPT 4SQ20CT).
• Optional, field configurable Conduit Covers are available and match Cylinder finish and diameter.

Construction

• Heavy-gauge extruded Aluminum construction.
• Reflector design allows air flow across heatsink to improve thermal management.
• Light Engine and Driver are field replaceable and serviceable from below the ceiling.

Listings

• Fixtures are CSA certified to meet US and Canadian standards.
• All fixtured are manufactured in strict accordance with the appropriate and current requirements of the “Standards for Safety" per UL.
• Damp Location standard.
• Wet Location available.

Photometrics

• All photometry is conducted by IESNA standard LM-79-08 in an accredited lab.
• LEDs are tested to LM-80 standards. Lumen maintenance is calculated via TM-21.

Warranty

• 5-year limited warranty.