Home > Halo Lighting > Halo Recessed H35RICAT 3" Shallow Remodel Housing for LED Integrated Trims or Modules

description
PRODUCT SPECIFICATIONS
Housing
Housing
- Die formed aluminum housing can be installed from below the ceiling and accommodate ceilings from 3/8" – 3/4" thick.
- Shipped with paint overspray protector installed
- Captive preinstalled mounting springs retain housing securely in ceiling.
- Housing can be removed for service or splice inspection
- Closed cell gaskets achieve restrictive airflow requirements without additional caulking
- (3) 1/2" trade size pry outs and (2) Slide-N-Side wire traps for nonmetallic cable.
- Accepts 14/2, 14/3, 12/2, 12/3 (US) and 14/2, 14/3, 12/2 (Canada) standard non-metallic sheathed cable.
- Maximum of (6) #12 or (8) #14 conductors rated for 90 degree C permitted in box (10in3 internal volume).
- Wago push wire connectors for field connections
- Two-conductor wire mount connector mates with RL3, RA3 family of LED integrated trims.
- CAUTION: verify LED module input voltage is compatible with the input voltage of the housing. If uncertain, consult a qualified electrician
- Type IC inherently protected, suitable for direct contact to air permeable insulation and cULus listed for damp locations.
- Not for use in direct contact with spray foam insulation, consult NEMA LSD57-2013.
- Wet location listed in covered ceilings and IP44 certified with select lens trims.
- Airtight per ASTM-E283.
- Can be used for State of California Title 24 high efficacy luminaire compliance with designated integrated LED trims.
- Suitable for use in clothes closets when installed in accordance with the NEC 410.16 spacing requirements
- Five-year limited warranty
Share your knowledge of this product. Be the first to write a review »
Browse for more products in the same category as this item:
Download PDF Specification