Home > Halo Lighting > Halo Recessed HLA305FS5 3" Round LED Directional with Remote Driver/ Junction Box, 600 Lumens, 90 CRI, Field Selectable 2700K - 5000K, 120V, LE & TE Phase Cut 5% Dimming, Matte White Flange
Halo Recessed HLA305FS5 3" Round LED Directional with Remote Driver/ Junction Box, 600 Lumens, 90 CRI, Field Selectable 2700K - 5000K, 120V, LE & TE Phase Cut 5% Dimming, Matte White Flange
Halo Recessed HLA305FS5 3" Round LED Directional with Remote Driver/ Junction Box, 600 Lumens, 90 CRI, Field Selectable 2700K - 5000K, 120V, LE & TE Phase Cut 5% Dimming, Matte White Flange
Regular price
Price:
$31.50
Regular price
Price:
Sale price
$31.50
Unit price
per
Ordering a Large Quantity?
Request a quote
description
PRODUCT DESCRIPTION
Selectable System
Selectable System
- Use the 5-position color selector switch to choose between: 2700K, 3000K, 3500K, 4000K, and 5000K
- Factory default color temperature (CCT) is set to bright white (3000K)
- Module construction includes LED array, heat sink, reflector, lens, baffle and trim ring
- Regressed baffle
- Heat sink designed to conduct heat away from the LED array, keeping the junction temperatures below specified maximums, even when installed in insulated ceiling environments
- Adjustable gimbal tilts up to 90º and rotates up to 360º
- Mid power LED array provides a uniform source with high efficiency and no pixilation
- 90 CRI minimum, R9 greater than 50
- Color accuracy at 4 SDCM in between endpoints, provide excellent color quality and uniformity
- Regressed lens
- Impact-resistant polycarbonate
- Convex form and lamp-like appearance
- Pre-galvanized steel driver/junction box with captive hinged cover
- Listed for six #12 AWG 90° C splice conductors: two in, two out plus two grounds
- Two 1/2" conduit pry-outs
- Two Slide-N-Side non-metallic (NM) wire traps allows wiring outside the box
- Accepts NM cable types: 14-2, 14-3, 12-2, 12-3 (U.S.) and 14-2, 14-3, 12-2 (Canadian)
- Three 4-port push wire nuts with clear caps for quick and reliable mains voltage connections
- Integral mounting holes facilitate direct mounting to building structure or mounting frame
- 6-, 12-, and 20-ft extension cables available for centralized junction box installation
- Integral 120V 60 Hz constant current driver provides noise free operation
- Dimmable: Continuous, flicker-free phase cut (leading-edge/trailing-edge - LE/TE) dimming from 100% to 5% output with compatible dimmers
- See this fixture’s Dimming Guide for compatible dimmers
- Tip: For optimal dimming performance, consider dimmers with low-end trim adjustment; note that some dimmers require a neutral wire in the box
- Plenum rated inline electrical barrel connector provides low voltage connection to fixture fitting (CMP/FT6 rated)
- Closed cell gaskets achieve restrictive airflow requirements without additional caulking
- No additional housing or junction box required (not for installation in recessed cans)
- The included fixture (light engine) and remote driver / junction box may be used in direct contact with insulation
- Can be installed in 1/2” to 1-1/4” thick ceilings
- Cutout utilizes standard round hole saw sizes; cutout template provided
- Heat treated springs hold fixture fitting securely in the ceiling eliminating light leak
- Installer must cut hole and install fixture into aperture with the clips compressed
- When released, the spring clips will rest on the back side of the ceiling material holding the fixture in place
- Can be removed from below the ceiling for service or replacement
- For new construction applications, use HALO Canless Mounting Frames or Smash Plates prior to drywall installation
- Pre-galvanized steel mounting frame locates fixture fittings during electrical rough-in and provides cutout guidance for drywall contractor
- Provides attachment of remote driver/junction box
- UL Certified US and Canada Type IC suitable for direct contact with air permeable insulation
- Wet location listed. Not recommended for use in direct contact with spray foam insulation, reference NEMA LSD57-2013
- Airtight certified per ASTM-E283
- EMI/RFI emissions per FCC 47CFR Part 15 consumer limits
- Contains no mercury or lead and RoHS compliant
- Photometric testing in accordance with IES LM- 79-08
- Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11
- Can be used for State of California Title 24 high efficacy luminaire compliance. Complies with Title 24 JA8-2022-E.
- Can be used International Energy Conservation Code (IECC) high efficiency luminaire compliance.
- ENERGY STAR listed, reference database for current listings
- Five year limited warranty
Download PDF SpecificationShare your knowledge of this product. Be the first to write a review »
Browse for more products in the same category as this item: