Home > Juno Lighting > Juno Recessed Lighting IC1RLEDG3-35K-U 4" LED IC Type Remodel Housing 600 Lumens, 3500K Color Temperature, Universal Driver 120-277V

description
Description
Dedicated
45" LED remodel housing with integral 14.6W or 16W nominal light
engine, with choice of dimmable drivers: dedicated 120 volt driver or
universal 120V-277V driver. 2700K. 83 CRI typical. Shallow, IC housing
designed for use in 2x6 IC or non-IC construction. Ceiling cutout 4 3/8"
dia.
Features & Benefits
- Dedicated LED, Air-Loc® remodel housing with integral light engine
- Shallow housing allows for fit in 2 x 6 construction
- IC remodel housing for remodel application where back side of ceiling is not accessible
- Installs through an opening in the ceiling from below
- Secured in place by factory installed remodel springs
- Can be completely covered with insulation
- LED housing is designed to provide 50,000 hours of life and is compatible with many standard Juno trims
- 5 year limited warranty on LED components.
| LED Light Engine | LED
array attached to high purity aluminum, thermally conductive housing
and heat sink provides superior heat transfer to ensure long life of
the LED Replaceable light engine mounts directly to housing assembly and incorporates the latest generation, high lumen output LED array LEDs are binned to standards that exceed ENERGY STAR® requirements yielding superior fixture to fixture color uniformity 2700K, 3000K, 3500K, or 4100K color temperatures available 83 CRI typical. |
| Optical System | Computer-optimized
reflector design with high reflectance finish coupled with a high
transmission diffusing lens conceals the LEDs and produces uniform
aperture luminance Deep regression of lens produces a low glare, efficient system that can produce over 600 lumens with select trims using less than 11W (Nominal input wattage @ 120-volt operation with dedicated 120-volt driver under stable operating conditions.) |
| Aesthetic Trim Selections | Compatible with wide selection of existing Juno trims Shadow free, knife edge design blends seamlessly into ceiling. |
| LED Driver | Choice
of dedicated 120 volt driver or universal voltage driver that
accommodates input voltages from 120-277 volts AC at 50/60Hz Power factor > 0.9 at 120V input 120 volt only driver is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers Universal voltage driver is dimmable with the use of most 0-10V wall box dimmers Mounted on the j-box for easy access and cool operation. |
| Life | Rated for 50,000 hours at 70% lumen maintenance. |
| Labels | ENERGY STAR® qualified to luminaires V1.1 requirements when used with select trims Certified to the high efficiency requirements of California T24-2008 with select trims UL listed for U.S. and Canada damp locations Union made UL and cUL. |
| Housing | Designed for use in IC (insulated ceiling) or non-IC construction luminum housing sealed for Air-Loc® compliance Remodel springs accommodate up to 1 1⁄2” ceiling thickness. |
| Junction Box | Pre-wired junction box provided with (5) 1⁄2” knockouts, (4) knockouts for 12/2 or 14/2 NM cable and ground wire Knockouts equipped with pryout slots Quick connect electrical connectors supplied as standard for fast, secure installation. |
Ordering Information
Share your knowledge of this product. Be the first to write a review »
Browse for more products in the same category as this item:
Download Lensed Trims Specification