

description
Description
Dedicated 6" LED new construction WarmDim housing with integral 14W nominal light engine with dimmable 120 volt driver. 3000K. Emulates incandescent dimming. Wide flood optic shipped as standard. Shallow, IC housing designed for use in 2 x 6 IC or non-IC construction. Ceiling cutout 6 3/4" dia.
Features & Benefits
- Dedicated LED, Air-Loc® sealed new construction housing with integral light engine
- Shallow housing allows for fit in 2 x 6 construction
- Can be completely covered with insulation
- Fully sealed housing stops infiltration and exfiltration of air, reducing heating and air cooling costs without the use of additional gaskets
- LED housing is designed to provide 50,000 hours of life and is compatible with many standard Juno trims
- 5 year limited warranty on LED components.
LED Light Engine | Proprietary micro processor controlled light engine emulates dimming performance of incandescent light source Replaceable light engine integrated to one piece high purity aluminum, thermally conductive housing provides uninterrupted heat transfer to ensure long life of the LEDs 3000K color temperature at full lumen output. 83 CRI typical. |
Optical System | Computer-optimized reflector design with high reflectance white finish coupled with a high transmission diffusing lens conceals the LEDs and produces uniform aperture luminance Deep regression of lens produces a low glare, efficient system that can produce over 600 lumens with select trims using less than 15W Wide flood distribution shipped as standard with optional optic accessory available and sold separately. |
Aesthetic Trim Selections | Compatible with wide selection of existing Juno trims. Shadow free, knife edge design blends seamlessly into ceiling. |
LED Driver | Dedicated 120 volt driver. Power factor > 0.9 Dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers. Mounted between the j-box and housing for easy access and cool operation. |
Life | Rated for 50,000 hours at 70% lumen maintenance. |
Labels | Certified to the high efficiency requirements of California T24-2008 with select trims. UL listed for U.S. and Canada through-branch wiring, damp locations. Union made. UL and cUL. |
Housing | Designed for use in IC (insulated ceiling) or non-IC construction. Aluminum housing sealed for Air-Loc® compliance. Housing is vertically adjustable to accommodate up to a 2” ceiling thickness. |
Junction Box | Pre-wired junction box provided with (5) 1⁄2” and (1) 3⁄4” knockouts, (4) knockouts for 12/2 or 14/2 NM cable and ground wire. UL listed and cUL listed for through-branch wiring, maximum 8 #12 branch circuit conductors. Junction box provided with removable access plates. Knockouts equipped with pryout slots. Quick connect electrical connectors supplied as standard for fast, secure installation. |
Mounting Frame | 22-gauge die-formed galvanized steel mounting frame. Rough-in section (junction box, mounting frame, housing and bar hangers) fully assembled for ease of installation. |
Real Nail 3 Bar Hangers | Telescoping Real Nail 3® system permits quick placement of housing anywhere within 24” O.C. joists or suspended ceilings. Includes removable nail for repositioning of fixture in wood joist construction. Integral T-bar notch and clip for suspended ceilings |
Ordering Information
Share your knowledge of this product. Be the first to write a review »
Browse for more products in the same category as this item: