Home > Lithonia Lighting > Lithonia LDN6 30/25 MVOLT GZ10 HSG 6" Round Downlight, 3000K, 3000 Lumens, 120-277V, 0-10V Driver Dims to 10%, Housing Only

description
PRODUCT FAMILY SPECIFICATIONS
INTENDED USE
Typical applications include corridors, lobbies, conference rooms and private offices.
CONSTRUCTION
Galvanized steel mounting/plaster frame; galvanized steel junction box with bottomhinged access covers and spring latches. Reflectors are retained by torsion springs. Vertically adjustable mounting brackets with commercial bar hangers provide 3-3/4" total adjustment. Two combination 1/2"-3/4" and four 1/2" knockouts for straight-through conduit runs. Capacity: 8 (4 in, 4 out). No. 12 AWG conductors, rated for 90 degreesC.
INTENDED USE
Typical applications include corridors, lobbies, conference rooms and private offices.
CONSTRUCTION
Galvanized steel mounting/plaster frame; galvanized steel junction box with bottomhinged access covers and spring latches. Reflectors are retained by torsion springs. Vertically adjustable mounting brackets with commercial bar hangers provide 3-3/4" total adjustment. Two combination 1/2"-3/4" and four 1/2" knockouts for straight-through conduit runs. Capacity: 8 (4 in, 4 out). No. 12 AWG conductors, rated for 90 degreesC.
Accommodates 12"-24" joist spacing.
Passive cooling thermal management for 25°C standard. Light engine and drivers are accessible from above or below ceiling.
Ceiling thickness range 1/2" to 1-1/2".
OPTICS
55 degrees cutoff to source and source image.
80CRI standard (90CRI optional)
LEDs are binned to a 3-step MacAdam Ellipse
Controls (Optional)
Passive cooling thermal management for 25°C standard. Light engine and drivers are accessible from above or below ceiling.
Ceiling thickness range 1/2" to 1-1/2".
OPTICS
55 degrees cutoff to source and source image.
80CRI standard (90CRI optional)
LEDs are binned to a 3-step MacAdam Ellipse
Controls (Optional)
- Luminaire can be equipped with interface for nLight wired, allowing it to communicate over an nLight network. Couple with nLight-enabled sensors, power packs, or WallPods using CAT-5 cabling to create an nLight Control Zone. Link Control Zone to a Gateway directly or via a Bridge for remote status monitoring and control using SensorView software.
- Luminaire can be equipped with interface for nLight Air, allowing it to communicate over the wireless nLight control platform. Can be paired to other luminaires and wall switches through CLAIRITY+, a mobile app, which allows individual fixture control.
UGR
UGR is zero for fixtures aimed at nadir with a cut-off equeal to or less than 60deg per CIE 117-1996
Discomfort Galre in Interior Lighting. UGR FAQs
ELECTRICAL
Adjustable lumen output with four module options.
MVOLT 120/277V 50/60Hz driver (0-10V & 120V Phase Dimming to 10% or 1% min dimming level). DALI driver dimming to 1% also available
FCC CFR Title 47 Part 15 Class A for 277V. FCC CFR Title 47 Part 15 Class B for 120V.
LUMEN MAINTENANCE
L80 @ 60,000 hours
LISTINGS
Certified to US and Canadian safety standards. Title 24 compliant (90CRI, up to 1000lm) Wet location, requires covered ceiling. Wallwash suitable for damp locations only.
WARRANTY
5-year limited warranty
UGR is zero for fixtures aimed at nadir with a cut-off equeal to or less than 60deg per CIE 117-1996
Discomfort Galre in Interior Lighting. UGR FAQs
ELECTRICAL
Adjustable lumen output with four module options.
MVOLT 120/277V 50/60Hz driver (0-10V & 120V Phase Dimming to 10% or 1% min dimming level). DALI driver dimming to 1% also available
FCC CFR Title 47 Part 15 Class A for 277V. FCC CFR Title 47 Part 15 Class B for 120V.
LUMEN MAINTENANCE
L80 @ 60,000 hours
LISTINGS
Certified to US and Canadian safety standards. Title 24 compliant (90CRI, up to 1000lm) Wet location, requires covered ceiling. Wallwash suitable for damp locations only.
WARRANTY
5-year limited warranty
Share your knowledge of this product. Be the first to write a review »
Browse for more products in the same category as this item:
Download PDF Specification