
description
HomeWorks QS RF Plug-In Modules function much like standard lamp dimmers, but can be controlled as part of a lighting control system. RF Plug-In Modules are useful in locations where plug-in lamps need to be dimmed or nondimmable loads need to be switched. RF Plug-In Modules can be hidden discretely behind furniture.
HomeWorks QS RF Plug-In Modules incorporate advanced features such as fade on / fade off, delayed long fade off, and rapid full on.
HomeWorks QS RF Plug-In Modules are simple to install and easy to use. RF Plug-In Modules allow floor and table lamps to be added to a system quickly and easily. RF Plug-In Modules can also be used to control non-dimming or general purpose loads.
| Model Numbers | HQR-15APS-1 |
| Power | 120V 50 / 60 Hz |
| Typical Power Consumption | 0.3 W Test conditions: load is off and nightlight mode enabled. |
| Regulatory Approvals | cUL, UL, NOM, FCC, IC, COFETEL |
| Environment | Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing. Indoor use only. |
| Communications | RF Plug-In Modules communicate with the HomeWorks QS system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. |
| ESD Protection | Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2. |
| Surge Protection | Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. |
| Power Failure | Power failure memory: should power be interrupted, the RF Plug-In Module will return to its previous state when power is restored. |
downloads
Share your knowledge of this product. Be the first to write a review »
Browse for more products in the same category as this item:
Download PDF manual