Lutron QSE-CI-DMX HomeWorks QS Control Interface

Description
The QSE-CI-DMX control interface allows zones on a GRAFIK Eye® QS to control DMX512-controlled devices. Any zone on the GRAFIK Eye QS can be mapped to either a single DMX512 channel or to three separate DMX512 channels, for RGB/CMY color-control applications.

Key Features
• Map any zone on a GRAFIK Eye QS control unit to any single DMX512 channel
• Map any zone on a GRAFIK Eye QS control unit simultaneously to three DMX512 channels for RGB/CMY color-control
• Integral RGB/CMY lookup table that maps GRAFIK Eye QS zone intensities to RGB/CMY values (colors)
• RGB/CMY table can be customized by using the Lutron QS Color Configuration Tool

Requirements
The QSE-CI-DMX requires the following:
• At least one GRAFIK Eye QS control unit connected to the QSE-CI-DMX through the QS communication link
• QS Link power supply; either:
- GRAFIK Eye QS control unit, as long as the GRAFIK Eye QS control unit is NOT powering any other QS link devices drawing a total of two (2) or more power draw units
- QS Link power supply, such as the QSPS-P1-1-50
• DMX512 link terminators at both ends of the DMX512 link (available from Lutron, part number LT-1)
• QS Communication Link Wire (PELV, Class 2: USA)
- Two 18 AWG (1.0 mm2) conductors for control power
- One twisted, shielded pair of 22 AWG (0.5 mm2) for data link
- Available from Lutron, part number GRX-CBL-346S