description
The PowPak™ Dimming Module with EcoSystem® is a radio frequency (RF) control that operates up to 32 EcoSystem® ballasts based on input from Pico® controls and Radio Powr Savr™ sensors. Configurable for multiple zones in a single area, the Dimming Module with EcoSystem® is ideal for small areas such as classrooms, conference rooms, and private offices. Communication with RF input devices, such as Pico® controls and Radio Powr Savr™ sensors, is accomplished using Lutron Clear Connect® RF Technology.
Features and Benefits
- Controls up to 32 EcoSystem® fluorescent dimming ballasts and LED drivers
- Various operating voltages available—refer to model number chart below for details on voltage requirements
- Receives input from up to nine Pico® controls, six Radio Powr Savr™ occupancy/vacancy sensors, and one Radio Powr Savr™ daylight sensor
- Utilizes Lutron Clear Connect® RF Technology
- Mounts to a junction box through a standard half-inch (NPT trade size) knockout
- Complies with requirements for use in a compartment handling environmental air (plenum) per NEC® 2011 300.22(C)(3)
| Model # |
RMJ-ECO32-DV-B |
| Operating voltage: |
120/277 V~ 50 / 60 Hz |
System Communication
|
- Operates using Clear Connect™ RF Technology for reliable wireless communication; refer to model number chart on page 1 for frequency band details
- RF range is 30 ft (10 m)
|
| Environment |
- Ambient operating temperature: 32 °F to 131 °F (0 °C to 55 °C)
- 0% to 90% humidity, non-condensing
- For indoor use only
|
EcoSystem® Link
|
- Communicates with up to 32 EcoSystem® enabled dimming ballasts, LED drivers, and interfaces such as C5-BMJ-16A
- EcoSystem® Digital Link can be wired Class 1 or Class 2 for maximum wiring flexibility
- Terminals accept 18 to 16 AWG (0.75 to 1.5 mm2) solid wire
NOTE: Must use Rapid Start sockets with EcoSystem® ballasts.
NOTE: The PowPak™ Dimming Module with EcoSystem® does NOT support the C5-XPJ-16A switching module.
NOTE: Wired sensors connected to EcoSystem® devices are NOT supported.
|
Default Operation
|
- Associated wireless input devices control all connected EcoSystem® ballasts and drivers
- Occupancy Sensors:
– Occupied: 100%; Unoccupied: 0% (OFF)
- Pico® Controls:
– On: 100%; Favorite Level: 50%; Off: 0% (OFF)
- Daylight Sensor: Decreases electric light in response to additional available daylight
|
Key Design Features
|
- LED status indicators show communication status and provide programming feedback
- Power failure memory: If power is interrupted, connected loads will return to the previous level prior to interruption
- EcoSystem® link miswire protection up to 347 V~
- Daylight override: Pressing the raise button on an associated Pico® will temporarily override daylighting for the fixtures in that Pico® group
– Daylighting will be re-enabled for that Pico® group when one of the following occurs:
• Two hours have passed since the override.*
• ON, OFF or Preset button has been pressed on a Pico® controlling that group.
• All associated Occupancy Sensors have reported unoccupied.
* Each time a daylighting override occurs for any Pico® group, the two hour timer is reset.
|