

description
Compliance | |
UL Listed
|
Suitable for Wet
Locations. Covered Ceiling Mount Only.
|
IESNA LM-79 & LM-80
Testing
|
RAB LED luminaires and
LED components have been tested by an independent laboratory in accordance
with IESNA LM-79 and LM-80.
|
IP Rating
|
Ingress protection rating
of IP66 for dust and water
|
Electrical | |
Driver
|
Class 2, Constant
Current, 120-277V, 50-60Hz, 120V: 0.47A, 208V: 0.27A, 240V: 0.24A, 277V:
0.21A
|
Dimming Driver
|
Driver includes dimming
control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming
circuit. Dims down to 10%.
|
THD
|
3.52% at 120V, 6.08% at
277V
|
Power Factor
|
99.65% at 120V, 94.48% at
277V
|
LED Characteristics | |
LEDs
|
Long-life, high-efficacy,
surface-mount LEDs
|
Color Stability
|
RAB LEDs exceed industry
standards for chromatic stability
|
Color Uniformity
|
RAB's range of Correlated
Color Temperature follows the guidelines of the American National Standard
for Specifications for the Chromaticity of Solid State Lighting (SSL)
Products, ANSI C78.377-2017.
|
Construction | |
Maximum Ambient
Temperature
|
Suitable for use in up to
75°C (167°F)
|
Cold Weather Starting
|
The minimum starting
temperature is -40°C (-40°F)
|
Lens
|
Vandal-resistant
polycarbonate textured opaque for low glare flat lens
|
Housing
|
Die-cast aluminum housing
and lens frame with (4) 1/2" NPS side conduit entries and weatherproof
rear wire plug and access plate
|
Mounting
|
Ceiling mount to recessed
junction with knockout template or directly to ceiling surface, utilizing side
conduit entry points
|
Air Tight
|
Housing certified Air
Tight as per ASTM E283
|
Finish
|
Our environmentally
friendly polyester powder coatings are formulated for high-durability and
long-lasting color
|
Sensor Specification | |
Multi
Level Motion Sensor
|
/WS2
sensor options use state-of-the-art surface mount technology (SMT), just like
cellular phones and beepers. SMT gives you more reliability, greater RF immunity. This compact sensor that can fit neatly where others cannot. This
sensor technology automatically affects the state of operation for lighting
systems or individual luminaries based upon detecting the presence or absence
of movement for both people as they exit/enter, or for the motion of moving
vehicles within the sensors viewing area. The wide 180° viewing angle can
detect movement along the entire side of a building with only one compact
sensor. The hard lens is molded as part of the case, vandalproof, rainproof,
bugproof and absolutely sealed. Sensor functions best when movement is across
its detection pattern, not towards the sensor.
|
Performance | |
Wattage
Equivalency
|
Equivalent
to 150W Metal Halide
|
Share your knowledge of this product. Be the first to write a review »
Browse for more products in the same category as this item: